香蕉视频色版_国产精品久久久久精k8 _最新av在线播放_中文精品一区二区_成人午夜碰碰视频_欧美日韩精品福利_午夜在线观看91_免费日韩电影

GENERAL TERMS AND SPECIAL CONDITIONS

“Our best service is your success”is our company's motto. It is our promising you with the best quality, lowest price and on time delivery. So, any of our customers' requirements, questions and comments will be welcomed at any time. You will always find us willing to make the extra effort to keep you a satisfied customer.  
We would like to announce our business terms and conditions as following to you who is interested in establishing trade relationship with our company.We can only accept the order and delivery the materials based on these terms and conditions as followings.

Asking a quotation
For the sake of our co-operation, please try to let us know the details of your requirements, the more,the better. The information we should know before we send our quotation is listed as below:
Density
The range of density in g/cm3 or g/in3
Drawing
:The drawing which would be needed must be offered by the customers
Dimensions: The dimensions should be informed together with tolerances----It can be financially disastrous to insist on unnecessarily close tolerances with small-Batch hardmetal components. Quoted tolerances vary, but are generally of the order of +/- 3 per cent or +/-3mm(whichever is the greater) for non-standard as-sintered components. Die-pressed standard items may have tolerances of +/-1 per cent and exceptionally much less, especially on long production runs. Friction-held inserts for parting and turning tools. Dissimilar grades have different shrinkage factors, and produce part of
slightly different size when made in the same die at the same pressure. Apart from variations in size, warping and shape changesdue to unbalanced shrinkagemay also occur, particularly with grades of high binder content. In general, carbide should either be used in such a way that small departures from nominal as-sintered shape and size can be tolerated, or else an adequate allowance must be made for grinding or otherwise finishing to final size. and their unit in mm or inch
Usage: The usage is very important for us to produce an available products
Package:Please let us know the package form and the net weight per unit and if the wooden box can be accepted

Special Conditions for different types of products

 Quotation Form for tungsten intermediate products               

Products

WO3%
min.

Density
g/cm3

Quantity

Delivery Term

Special Requirements

MT

kgm

 

 

 

 

 

 

 

Notes

Quantity

Standard quantity 17-18MT(one container)
Small quantity: 100kgs-17MT
Sample quantity: less than 100kgs

Process Method

Please let us know in which production process method are you interested

Quotation form for tungsten final products

For tungsten powder

Products

W %

Grain Size (u)

Quantity

Delivery Term

Special Requirements

MT

kgm

  

  

  

  

  

   

  

Notes

Quantity

 

Standard quantity 1MT

Small quantity: 100kgs-999kgs

Sample quantity: less than 100kgs

Size

The range of grain size and the unit of grain size in FSSS value(Fisher Sub-Sieve Sizer) micron or mesh

For tungsten carbide powder

Products

WC( % )

Grain Size(u)

C content

Quantity

Delivery Term

Special Requirements

Free C%

Toatl C%

MT

kg

 

 

 

 

 

 

 

 

Product Number

NOTES

Quantity Standard quantity 1MT

Small quantity: 100kgs-999kgs

Sample quantity: less than 100kgs

Size The range of grain size and the unit of grain size in FSSS value(Fisher Sub-Sieve Sizer) micron or mesh


For mixed tungsten carbide (ready for pressing)

W C

%min.

Grain Size(u)

Other content

ISO Grade

Quantity

Delivery Term

Special Requirements

Co

Ti

TaC

MT

kg

                   

Product Number

NOTES

Quantity Standard quantity 1MT

Small quantity: 100kgs-999kgs

Sample quantity: less than 100kgs

Size The range of grain size and the unit of grain size in FSSS value

(Fisher Sub-Sieve Sizer Value) micron or mesh


Quotation Form for tungsten carbide products

Grade

Qantity

Delivery terms

Special Requirements

CN

ISO

WC

Co

Ti

Ta

Ni

Pcs

kgs

                     

Products Number 

NOTES

Quantity :Formal order or samples for testing in PCs or in kgs

Grade(composition): ISO application code or Chinese grade or any special grade ,if it is a special grade, the main composition in the raw materials (the powder mixture) weight per cent should be informed

Hardness: The minimum value of hardness (HRA or HV) must be informed

Transverse Rupture Strength :in N/mm2 or kgf/mm2

Status: Blank(semi-finished) or finished, grounded or ungrounded

Porosity: A--, B--, C--,

Magnetic: Magnetic or non-magnetic

Grain size: The grain size and the unit of grain size in FSSS (Fisher Sub-Sieve Sizer)micron or mesh of the raw materials


Quotation form for tungsten and molybdenum wire

Products No.

Dia.

Status

Quantity

Delivery Term

Special Requirements

mm

Mg/200m

See Notes

10km

kgs

   
             

NOTES

Quantity :Formal order or samples for testing in PCs or in kgs,and our min. quantity

for the formal order is 10km or 10kgm.

Status: We should be informedthat the status of the wire and/or heater such as

Cleaned or Black, Doped or Pure, Stranded or Straight, Coiled or PCs, if coiled,

the inside diameter of coil must be informed

Drawing :The drawing must be offered by the customer for metallising heater

Dimensions: The dimensions of Diameter and length should be informed together with tolerances and their unit in mm or inch


Quotation form for tungsten  Heater

Products Drawing No.

Dimensions

Status

Quantity

Delivery Term

Special Requirements

See Table below

See Notes

10km

kgs

                 

NOTES

Quantity :Formal order or samples for testing in PCs or in kgs,and our min. quantity

for the formal order is 10km or 10kgm.

Status :We should be informedthat the status of the wire and/or heater such as

Cleaned or Black, Doped or Pure, Stranded or Straight, Coiled or PCs, if coiled,

the inside diameter of coil must be informed

Drawing :The drawing must be offered by the customer for metallising heater

Dimensions: The dimensions of Diameter and length should be informed together with tolerances and their unit in mm or inch

Making a contract

We accept the contract made by fax or original copy by mail whatever the contact method is telephone, fax and/or email ,we have the present contract form and if you would like to use it, we’ll send it to you as soon as got your confirmation.

Prices Principle

Owing to the frequent fluctuation of the tungsten products’ price, we are very sorry for we could not list all the present prices with the introduction to our products in this site. But we’ll be very glad to send you our present prices on the our general principle as following according to your requirement(s) :

1. If the quantity is lower than the formal order , the prices of little quantity is higher than the normal price; and

2. The price of long-term contract is lower than the price of odd lot; and

3.The price of our standard products is lower than the price of the special order which ordered our products with special requirements

4. The price which we send to you must be FOB the Chinese main port if you have not yet let us know your requirements of Transport method and terms----we always delivery the commodities according to our customers’ instructions or our contract terms. the method can be used such as Sea freight Air freight and Express mail (DHL, UPS, FedEx, TNT, EMS )

Payment terms

We only accept the payment method is payment in advance by Telegraphic Transfer(T.T.)----the bank fee(s) will be deducted from the payments, Check, or Irrevocable Letter of Credit (L/C) which is opened according to Uniform Customs and Practices for Documentary Credit(19thversion) ,International Chamber of commerce, Paris, France, Publication No.500,unless agree to in writing by our General Manager or Sale manager.

Documents Avialable

We will offer documents as Commercial Invoice, Packing List, Bill of Landing, Certificate of Analysis---- The analysis results mentioned in this web site represent the general quality of our commodities, so we can not guarantee commodities we supply or samples we send are strictly in conformity with our statement here. Then the above descriptions of the commodities are for your purchase reference only. We have no responsibility for any problem arising from misuse of these descriptions. Meanwhile, if it is required we can offer

1.Certificate of Quantity and/ or Quality effected by China Commodity Inspection Bureau (CCIB);

2) Generalized System of Preference Certificate of Origin Form-A (GSP Form-A (green ));

3) If it is needed and the related expenses may be paid by the buyer, we can provide the buyer with SGS Certificate (effected by SGS- CSTC Standards Technical Services Ltd.).

4) Materials Safety Data Sheet(MSDS) It will be supplied by our technical staff, based upon their knowledge and experiences, and for the buyer’s reference only, but it is not as a document for negotiation and not a warranty for quality.

Tax, Fee and Customs

Any tax, duty, custom, inspection, or testing fee or any other tax ,fee, or charge of any nature imposed by any government should be paid by the buyer in addition to the contract price as quoted or invoiced, unless it has been stated as a responsibility of us in the contract between us and the buyer.

Samples for testing

We would like to offer free samples of some of products which we have the stock if our customers may pay the transport fee and any related expenses in advance.

Errors and Shortage

Errors in our documents and shortage of our commodities must be reported in writing (fax or letter or email ) within 5 working days of receipt of the commodities.


[Homepage]   [Chinese Version]    [Visit Us]    [Feedback]   [Search]
© Copyright 2000  ChinaTungsten Online

 

 

日韩一级毛片| 视频精品一区| 91久久精品一区二区二区| 91欧美一区二区| 亚洲国产第一页| 欧美在线一卡| 亚洲人成77777在线观看网| 91精品在线免费| 日韩一区二区三区电影在线观看| 国产亚洲欧美在线| 国产三级精品在线| 91精品国产高清一区二区三区 | 亚洲自啪免费| 日韩欧美黄色| 欧美日韩精品是欧美日韩精品| 一区二区三区精密机械公司| 超碰在线免费看| 欧美大片高清| 黄色软件视频在线观看| 香港久久久电影| 外国成人在线视频| 日韩av首页| 欧美一级精品| 亚洲精品伦理在线| 精产国产伦理一二三区| jk漫画禁漫成人入口| 波多野结衣欧美| 91亚洲一区| 亚洲欧美综合| 欧美精品日韩精品| 二区三区在线| www.爱久久| 国产精品一二三四区| 欧美伊人久久久久久久久影院 | 久久三级毛片| 久久久久久色| 色婷婷av一区二区三区软件| 欧美色18zzzzxxxxx| 日本成人中文| 久久影院视频免费| 亚洲男人7777| 欧美片网站免费| 岛国一区二区在线观看| 亚洲福利视频网| 2019年精品视频自拍| 久热精品视频| 欧美高清一级片在线| √天堂8资源中文在线| 亚洲高清免费| 在线日韩国产精品| av影院在线| 午夜亚洲福利在线老司机| 色婷婷av一区二区三区大白胸| av超碰免费在线| 亚洲小说欧美另类社区| 欧美日韩亚洲一区二| 成人在线影视| 国产精品五区| 欧美一区二区三区四区在线观看 | 深夜福利一区| www.日韩在线| 色综合久久88色综合天天6| 97国产在线| av网址在线免费观看| 欧美一区高清| 色天使色偷偷av一区二区| 欧美野外wwwxxx| 奇米色一区二区三区四区| 日韩免费视频一区| 精品一区二区三区中文字幕视频 | 国产真实伦在线观看| 川上优av中文字幕一区二区| 狠狠色狠狠色综合婷婷tag| 久久精品国产77777蜜臀| 中文字幕va一区二区三区| 午夜3点看的视频| 黄色网址在线免费| 日韩天堂av| 在线电影欧美成精品| 国精产品一区二区三区有限公司 | 欧美日韩性生活视频| 国产蜜臀一区二区打屁股调教| 日韩在线播放一区二区| 亚洲成色777777女色窝| 成人黄色av网址| 一区二区三区四区在线播放 | 在线看片福利| 国产91精品露脸国语对白| 日本在线三级| 91精品成人| 欧美va亚洲va在线观看蝴蝶网| av日韩一区| 亚洲伦在线观看| 性欧美xxx69hd高清| 久久综合成人精品亚洲另类欧美 | 亚洲欧美一区在线| 日韩一区二区三区电影在线观看 | 亚洲精品成人精品456| 国产啊啊啊视频在线观看| 国产不卡在线一区| 丁香婷婷在线观看| 麻豆国产精品视频| 小草av在线播放| 日本午夜一区二区| 国产网友自拍电影在线| 国产欧美不卡| 亚洲一本大道| 天堂精品中文字幕在线| 97国产在线| 男人的天堂久久精品| 午夜爽爽视频| 日精品一区二区三区| 最新av在线网站| 蜜臀av一区二区在线观看| 日本一二三区在线视频| 精品在线免费视频| 国产日本在线观看| 国产精品一区免费视频| 国产精品刘玥久久一区| av在线不卡电影| 天天干在线视频论坛| 国产蜜臀97一区二区三区| 亚洲电影视频在线| 国产精品情趣视频| 日本.亚洲电影| 午夜a成v人精品| 成人午夜网址| 日韩欧美国产系列| 亚洲国产第一| 一二三区在线观看| 国产乱子伦视频一区二区三区| 国产youjizz在线| 91亚洲国产成人精品一区二区三| 丰乳肥臀在线| 亚洲综合在线免费观看| 国产一区丝袜| 精品国产乱码久久久久久蜜臀| 欧美日韩亚洲国产精品| 亚洲综合图片| 26uuu成人网一区二区三区| 在线观看爽视频| 色婷婷综合久久久久中文一区二区| 欧洲在线一区| 亚洲精品国产拍免费91在线| 日韩在线卡一卡二| 手机av免费在线| 亚洲一区二区在线视频| 视频福利一区| 99精产国品一二三产品香蕉| 蜜桃视频第一区免费观看| 五月婷婷视频在线观看| 亚洲一级电影视频| 色135综合网| 一色桃子在线| 国产欧美日韩在线视频| 亚洲啊v在线免费视频| 亚洲国产成人精品女人久久久 | 国产精品麻豆| 日韩无一区二区| 轻轻草成人在线| 天堂а√在线最新版中文在线| 黄色精品一区二区| 国产精品jizz在线观看美国| 国产在线电影| 亚洲九九爱视频| 日韩精品中文字幕第1页| 一级毛片在线看| 国产精品成人在线观看| 久久av资源| 一级片在线播放| 一区二区在线看| 91精品一区国产高清在线gif| 国产视频精品久久| 午夜精品视频在线观看| 国语精品一区| 国内小视频在线看| 欧美日韩一区不卡| 久久精品国产秦先生| 成人国产网站| 日韩国产在线播放| 成人的网站免费观看| 奇米777国产一区国产二区| 亚洲精品666| 中文字幕一区二区在线观看| 欧美成人激情| 牛牛精品在线| 日韩视频在线你懂得| 大胆亚洲人体视频| 女同一区二区三区| 国产综合视频一区二区三区免费| 亚洲精品欧美激情| 国产乱码精品| 国产69精品久久久久9999人| 亚洲人成电影在线观看天堂色| 久久精品亚洲精品国产欧美 | 老牛嫩草一区二区三区日本| 成人教育av| 啦啦啦中文高清在线视频| 一区二区国产视频| 羞羞答答国产精品www一本|